Formulated to bond to most bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured.
Overview
Acrylic
TECHNOLOGY
White
COLOUR
CONSISTENCY
Properties
Ideal Use
Bonding most plastic (polystyrene, acrylic, ABC, PVC) bathroom and shower enclosures to water resistant tile backer board (not cement board)
Technology
Acrylic
Application Type
Applicator Gun
Application Temperature
Above 10°C and below 38°C
(50°F to 100°F)
Service Temperature
-29°C to 49°C
(-20°F to 120°F)
Clean Up
Clean tools immediately with soapy water. Clean the surface of the tub enclosure immediately with soapy water. Cured adhesive may be carefully cut away with a sharp-edged tool.
Formulated to bond to most bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured.
Overview
Acrylic
TECHNOLOGY
White
COLOUR
CONSISTENCY
Benefits
High initial grab to reduce slippage of panels
No panel etching or burn through
Water based adhesive
Properties
Ideal Use
Bonding most plastic (polystyrene, acrylic, ABC, PVC) bathroom and shower enclosures to water resistant tile backer board (not cement board)
Technology
Acrylic
Application Type
Applicator Gun
Application Temperature
Above 10°C and below 38°C
(50°F to 100°F)
Service Temperature
-29°C to 49°C
(-20°F to 120°F)
Clean Up
Clean tools immediately with soapy water. Clean the surface of the tub enclosure immediately with soapy water. Cured adhesive may be carefully cut away with a sharp-edged tool.
Formulated to bond to most bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured.
Overview
TECHNOLOGY
White
COLOUR
CONSISTENCY
Benefits
High initial grab to reduce slippage of panels
No panel etching or burn through
Water based adhesive
Properties
Ideal Use
Bonding most plastic (polystyrene, acrylic, ABC, PVC) bathroom and shower enclosures to water resistant tile backer board (not cement board)
Technology
Acrylic
Application Type
Applicator Gun
Application Temperature
Above 10°C and below 38°C
(50°F to 100°F)
Service Temperature
-29°C to 49°C
(-20°F to 120°F)
Clean Up
Clean tools immediately with soapy water. Clean the surface of the tub enclosure immediately with soapy water. Cured adhesive may be carefully cut away with a sharp-edged tool.
