TYPAR HD Heavy-Duty Sealant is an approved alternative for TYPAR Double-Sided Tape on seaming applications.
Overview
Urethane Acrylic
TECHNOLOGY
Grey
COLOUR
CONSISTENCY
Properties
Ideal Use
Sealing windows, doors and seams on building and house wraps
Technology
Urethane Acrylic
Application Type
Applicator Gun
Application Temperature
0°C to 49°C (32°F to 120°F)
Clean Up
Remove any excess sealant with a clean rag or other disposal tool and water
Restrictions
Sealants should only be applied when surface and air temperatures are above 4° C. Do not apply on surfaces that exceed 60°C. TYPAR® HD Sealant is considered a non-priming sealant but it is the end user’s responsibility to check adhesion of the cured sealant on typical test joints before and after application.
TYPAR HD Heavy-Duty Sealant is an approved alternative for TYPAR Double-Sided Tape on seaming applications.
Overview
Urethane Acrylic
TECHNOLOGY
Grey
COLOUR
CONSISTENCY
Benefits
Superior holding power for windows, doors and seams
Paintable and stain resistant
Seals joints up to 2" with proper installation and joint design
Properties
Ideal Use
Sealing windows, doors and seams on building and house wraps
Technology
Urethane Acrylic
Application Type
Applicator Gun
Application Temperature
0°C to 49°C (32°F to 120°F)
Clean Up
Remove any excess sealant with a clean rag or other disposal tool and water
Restrictions
Sealants should only be applied when surface and air temperatures are above 4° C. Do not apply on surfaces that exceed 60°C. TYPAR® HD Sealant is considered a non-priming sealant but it is the end user’s responsibility to check adhesion of the cured sealant on typical test joints before and after application.
TYPAR HD Heavy-Duty Sealant is an approved alternative for TYPAR Double-Sided Tape on seaming applications.
Overview
TECHNOLOGY
Grey
COLOUR
CONSISTENCY
Benefits
Superior holding power for windows, doors and seams
Paintable and stain resistant
Seals joints up to 2" with proper installation and joint design
Properties
Ideal Use
Sealing windows, doors and seams on building and house wraps
Technology
Urethane Acrylic
Application Type
Applicator Gun
Application Temperature
0°C to 49°C (32°F to 120°F)
Clean Up
Remove any excess sealant with a clean rag or other disposal tool and water
Restrictions
Sealants should only be applied when surface and air temperatures are above 4° C. Do not apply on surfaces that exceed 60°C. TYPAR® HD Sealant is considered a non-priming sealant but it is the end user’s responsibility to check adhesion of the cured sealant on typical test joints before and after application.
