A latex, water-based adhesive formulation for bonding most foam insulation panels to a variety of porous construction materials including, but not limited to, wood, gypsum board, and concrete.
Overview
Acrylic Latex
TECHNOLOGY
Tan
COLOUR
Smooth Paste
CONSISTENCY
Properties
Ideal Use
Bonding most types of surfaces including unfaced EPS (expanded polystyrene foam), XPS (extruded polystyrene foam), PUR (polyurethane) foam, and PIR (polyiso/
polyisocyanurate) foam, rigid polystyrene, wood, concrete, non-glazed brick, and drywall
Technology
Acrylic Latex
Application Type
Applicator Gun
Application Temperature
Above 5°C and below 38°C
(40°F to 100°F)
Service Temperature
-17.78°C to 77°C
(0°F to 170°F)
Clean Up
Clean tools and any uncured adhesive residue immediately with mineral spirits. Cured adhesive may be removed mechanically.
A latex, water-based adhesive formulation for bonding most foam insulation panels to a variety of porous construction materials including, but not limited to, wood, gypsum board, and concrete.
Overview
Acrylic Latex
TECHNOLOGY
Tan
COLOUR
Smooth Paste
CONSISTENCY
Features
Weather resistant
High initial grab to reduce number of fasteners
Will not burn through foam board
Certifications
Properties
Ideal Use
Bonding most types of surfaces including unfaced EPS (expanded polystyrene foam), XPS (extruded polystyrene foam), PUR (polyurethane) foam, and PIR (polyiso/
polyisocyanurate) foam, rigid polystyrene, wood, concrete, non-glazed brick, and drywall
Technology
Acrylic Latex
Application Type
Applicator Gun
Application Temperature
Above 5°C and below 38°C
(40°F to 100°F)
Service Temperature
-17.78°C to 77°C
(0°F to 170°F)
Clean Up
Clean tools and any uncured adhesive residue immediately with mineral spirits. Cured adhesive may be removed mechanically.
