Dispenses a low pressure/low curing force formula guaranteed to not warp or bow window or door frames and jambs.
Meets AAMA-812
Fills and air seals better than fiberglass
Class 1 fire rated
Overview
Polyurethane
TECHNOLOGY
12 / 16 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
Filling and sealing window and door frames / jambs, through-penetrations, gaps and cracks in foundations, crawlspaces, attics and basements, partitions and stud walls, space connections and soffits and drop ceilings
Technology
Polyurethane
Application Type
Straw Dispense
Application Temperature
16°C to 38°C
(60°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap about 1/3 full, allowing room for expansion. Do not overfill. Direct sunlight discolors foam if not
painted or covered.
Dispenses a low pressure/low curing force formula guaranteed to not warp or bow window or door frames and jambs.
Meets AAMA-812
Fills and air seals better than fiberglass
Class 1 fire rated
Overview
Polyurethane
TECHNOLOGY
12 / 16 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
Filling and sealing window and door frames / jambs, through-penetrations, gaps and cracks in foundations, crawlspaces, attics and basements, partitions and stud walls, space connections and soffits and drop ceilings
Technology
Polyurethane
Application Type
Straw Dispense
Application Temperature
16°C to 38°C
(60°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap about 1/3 full, allowing room for expansion. Do not overfill. Direct sunlight discolors foam if not
painted or covered.
View Documentation
Documents
DAP No Warp Window and Door Sealant – MSDS_EN
PRODUCT CHART
Select any product code in the chart below to view pricing and available stock
