Provides a 100% weatherproof and waterproof seal with the ability to be applied on wet and damp surfaces. It has a fast 30 minute paint and rain ready time, and is specially formulated to meet ASTM C920, Class 35.
Overview
Advanced Hybrid Polymer
TECHNOLOGY
White / Clear
COLOUR
Paste
CONSISTENCY
Properties
Ideal Use
For caulking and sealing windows, doors, siding, exterior trim, baseboards, moulding, gutters, flashing, pipes, vents, ducts, butt joints, corner joints and above ground foundations
Ideal Substrates
Wood (painted and unpainted), vinyl, most plastics, most metals, fiber cement, concrete, natural stone, granite and marble, brick, glass, ceramic, porcelain, fiberglass, drywall, plaster, stucco and most common building materials
Technology
Advanced Hybrid Polymer
Application Type
Applicator Gun
Application Temperature
-17ºC to 60ºC
(1.4°F to 140°F)
Service Temperature
-53ºC to 88ºC
(-63.4°F to 190.4°F)
Clean Up
Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must be cut or scraped away.
Provides a 100% weatherproof and waterproof seal with the ability to be applied on wet and damp surfaces. It has a fast 30 minute paint and rain ready time, and is specially formulated to meet ASTM C920, Class 35.
Overview
Advanced Hybrid Polymer
TECHNOLOGY
White / Clear
COLOUR
Paste
CONSISTENCY
Features
Proven wet surface application
30 minute paint, rain and water ready
Extreme temperature use -17°C to 60°C
Certifications
Properties
Ideal Use
For caulking and sealing windows, doors, siding, exterior trim, baseboards, moulding, gutters, flashing, pipes, vents, ducts, butt joints, corner joints and above ground foundations
Ideal Substrates
Wood (painted and unpainted), vinyl, most plastics, most metals, fiber cement, concrete, natural stone, granite and marble, brick, glass, ceramic, porcelain, fiberglass, drywall, plaster, stucco and most common building materials
Technology
Advanced Hybrid Polymer
Application Type
Applicator Gun
Application Temperature
-17ºC to 60ºC
(1.4°F to 140°F)
Service Temperature
-53ºC to 88ºC
(-63.4°F to 190.4°F)
Clean Up
Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must be cut or scraped away.
