Provides a 100% weatherproof and waterproof seal with the ability to be applied on wet and damp surfaces. It has a fast 1 hour paint and rain ready time and meets ASTM C920, Class 25. For use on horizontal surfaces only, interior or exterior.
Self-leveling, no tools required
Proven wet surface application
1 hour paint and rain ready
Overview
Advanced Hybrid Polymer
TECHNOLOGY
266 ML
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
For sealing and filling horizontal gas and cracks in concrete driveways, steps, patios, sidewalks, garages, above ground foundations and other concrete surfaces
Ideal Substrates
Concrete, mortar, stone, brick, wood, stucco and most common building materials
Technology
Advanced Hybrid Polymer
Application Type
Applicator Gun
Application Temperature
-7ºC to 49ºC
(19°F to 120.2°F)
Service Temperature
-53ºC to 88ºC
(-63.4°F to 190.4°F)
Clean Up
Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must be cut or scraped away.
Restrictions
Use on horizontal surfaces only. Not recommended for continuous underwater use, high temperature surfaces or for surface defects.
Provides a 100% weatherproof and waterproof seal with the ability to be applied on wet and damp surfaces. It has a fast 1 hour paint and rain ready time and meets ASTM C920, Class 25. For use on horizontal surfaces only, interior or exterior.
Self-leveling, no tools required
Proven wet surface application
1 hour paint and rain ready
Overview
Advanced Hybrid Polymer
TECHNOLOGY
266 ML
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
For sealing and filling horizontal gas and cracks in concrete driveways, steps, patios, sidewalks, garages, above ground foundations and other concrete surfaces
Ideal Substrates
Concrete, mortar, stone, brick, wood, stucco and most common building materials
Technology
Advanced Hybrid Polymer
Application Type
Applicator Gun
Application Temperature
-7ºC to 49ºC
(19°F to 120.2°F)
Service Temperature
-53ºC to 88ºC
(-63.4°F to 190.4°F)
Clean Up
Remove excess uncured sealant from surfaces and tools with mineral spirits. Excess cured sealant must be cut or scraped away.
Restrictions
Use on horizontal surfaces only. Not recommended for continuous underwater use, high temperature surfaces or for surface defects.
