A high-quality primer used for priming and sealing absorbent surfaces to improve bonding of asphalt coatings, modified bitumen membranes, waterstops and finishes.
Overview
TECHNOLOGY
Black
COLOUR
Aerosol
CONSISTENCY
Properties
Ideal Use
To prime all types of metal to enhance adhesion of asphalt mopped and thermofused membranes
Ideal
Substrates
Thermal insulation, concrete, wood, metal, masonry, gypsum, asbestos, asphalt and similar surfaces
Application
Type
Aerosol (sprayed)
Application
Temperature
-10ºC to 40ºC (14ºF to 100ºF)
Service
Temperature
-30ºC to 85ºC (-22ºF to 185ºF)
Coverage
3 m2/can (approx.)
Clean Up
Clean with mineral spirits
Restrictions
Avoid use where solvent odours may taint food or other susceptible products. Do not apply over coal-tar coatings. Do not apply to wet surfaces.
A high-quality primer used for priming and sealing absorbent surfaces to improve bonding of asphalt coatings, modified bitumen membranes, waterstops and finishes.
Overview
TECHNOLOGY
Black
COLOUR
Aerosol
CONSISTENCY
Benefits
No brushes or rollers required
Fast drying
Enhances adhesion to provide tenacious bond of subsequent coating
Properties
Ideal Use
To prime all types of metal to enhance adhesion of asphalt mopped and thermofused membranes
Ideal
Substrates
Thermal insulation, concrete, wood, metal, masonry, gypsum, asbestos, asphalt and similar surfaces
Application
Type
Aerosol (sprayed)
Application
Temperature
-10ºC to 40ºC (14ºF to 100ºF)
Service
Temperature
-30ºC to 85ºC (-22ºF to 185ºF)
Coverage
3 m2/can (approx.)
Clean Up
Clean with mineral spirits
Restrictions
Avoid use where solvent odours may taint food or other susceptible products. Do not apply over coal-tar coatings. Do not apply to wet surfaces.
A high-quality primer used for priming and sealing absorbent surfaces to improve bonding of asphalt coatings, modified bitumen membranes, waterstops and finishes.
Overview
TECHNOLOGY
Black
COLOUR
Aerosol
CONSISTENCY
Benefits
No brushes or rollers required
Fast drying
Enhances adhesion to provide tenacious bond of subsequent coating
Properties
Ideal Use
To prime all types of metal to enhance adhesion of asphalt mopped and thermofused membranes
Ideal
Substrates
Thermal insulation, concrete, wood, metal, masonry, gypsum, asbestos, asphalt and similar surfaces
Application
Type
Aerosol (sprayed)
Application
Temperature
-10ºC to 40ºC (14ºF to 100ºF)
Service
Temperature
-30ºC to 85ºC (-22ºF to 185ºF)
Coverage
3 m2/can (approx.)
Clean Up
Clean with mineral spirits
Restrictions
Avoid use where solvent odours may taint food or other susceptible products. Do not apply over coal-tar coatings. Do not apply to wet surfaces.
