A polymer emulsion-based primer for self-adhered membranes.
Product Details
Ideal Use
When it is necessary to achieve a fast drying, solvent free, tacky surface where walking over the surface is not required during application.
Ideal
Substrates
Wood, preserved wood, gypsum board including DensGlass Gold®, polystyrene, masonry, concrete and metal.
Application
Type
Roller or Spray-Applied
Application
Temperature
Above -4ºC (24.8ºF)
Coverage
6 to 12 m2/litre depending on porosity and texture of surface
Clean Up
For uncured film use water. Use mineral spirits for cured films.
Restrictions
Apply under dry conditions above -4ºC. Avoid Freezing, store Aquatac™ above 0ºC. If frozen, allow to thaw at room temperature and mix prior to use.
A polymer emulsion-based primer for self-adhered membranes.
Benefits
Quick drying
Low VOC content - environmentally friendly
Provides a high level of tack on vertical surfaces
Product Details
Ideal Use
When it is necessary to achieve a fast drying, solvent free, tacky surface where walking over the surface is not required during application.
Ideal
Substrates
Wood, preserved wood, gypsum board including DensGlass Gold®, polystyrene, masonry, concrete and metal.
Application
Type
Roller or Spray-Applied
Application
Temperature
Above -4ºC (24.8ºF)
Coverage
6 to 12 m2/litre depending on porosity and texture of surface
Clean Up
For uncured film use water. Use mineral spirits for cured films.
Restrictions
Apply under dry conditions above -4ºC. Avoid Freezing, store Aquatac™ above 0ºC. If frozen, allow to thaw at room temperature and mix prior to use.
Downloads
Documents
SDS – BAKOR Aquatac Primer
TDS – BAKOR Aquatac Primer
PRODUCT CHART
Select any product code in the chart below to view pricing and available stock
