One-component polyurethane foam sealant that dispenses a minimal expanding formula guaranteed to not to warp or bow window or door frames and jambs. Window & Door provides airtight insulation around window and door frames to block airflow and increase energy efficiency of the building envelope.
Minimal expansion exerts virtually no force on frames or jambs
Meets ASTM E84, and UL/ULC-Listed and meets AAMA standards 812-04 for low pressure foams
Class 1 fire rated
Overview
Polyurethane
TECHNOLOGY
20 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
To fill and seal window and door frames / jambs, Gaps and cracks in above-grade foundations, crawlspaces, attics, and basements, partitions and stud walls
Technology
Polyurethane (PU)
Application Type
Gun Dispense
Application Temperature
16°C to 39°C
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
This product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4-1/2 full, allowing room for expansion.
One-component polyurethane foam sealant that dispenses a minimal expanding formula guaranteed to not to warp or bow window or door frames and jambs. Window & Door provides airtight insulation around window and door frames to block airflow and increase energy efficiency of the building envelope.
Minimal expansion exerts virtually no force on frames or jambs
Meets ASTM E84, and UL/ULC-Listed and meets AAMA standards 812-04 for low pressure foams
Class 1 fire rated
Overview
Polyurethane
TECHNOLOGY
20 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
To fill and seal window and door frames / jambs, Gaps and cracks in above-grade foundations, crawlspaces, attics, and basements, partitions and stud walls
Technology
Polyurethane (PU)
Application Type
Gun Dispense
Application Temperature
16°C to 39°C
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
This product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4-1/2 full, allowing room for expansion.
