One-component polyurethane foam sealant that dispenses approved fire-block (ICC-ES ESR-1926) foam. Designed to be used with the gun foam applicator for greater bead control and adjustable output.
Seals gaps and small openings to stop air and moisture infiltration
Approved Type V residential fire-block sealant
Class A fire rated
Overview
Polyurethane
TECHNOLOGY
24 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
To fill and seal through-penetrations for plumbing, electrical and HVAC services, gaps and cracks in foundations, crawlspaces, attics, and basements, partitions and stud walls, top and bottom of stair stringers, space connections in soffits and drop ceilings and any penetrations that requires an approved fire blocking sealant
Technology
Polyurethane (PU)
Application Type
Gun Dispense
Application Temperature
15.5°C to -38°C
(60°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
This product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4 full, allowing room for expansion.
One-component polyurethane foam sealant that dispenses approved fire-block (ICC-ES ESR-1926) foam. Designed to be used with the gun foam applicator for greater bead control and adjustable output.
Seals gaps and small openings to stop air and moisture infiltration
Approved Type V residential fire-block sealant
Class A fire rated
Overview
Polyurethane
TECHNOLOGY
24 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
To fill and seal through-penetrations for plumbing, electrical and HVAC services, gaps and cracks in foundations, crawlspaces, attics, and basements, partitions and stud walls, top and bottom of stair stringers, space connections in soffits and drop ceilings and any penetrations that requires an approved fire blocking sealant
Technology
Polyurethane (PU)
Application Type
Gun Dispense
Application Temperature
15.5°C to -38°C
(60°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
This product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4 full, allowing room for expansion.
