ALUMINUM ROOF COATING is a thick, homogeneous coating made of elastomeric bitumen, volatile solvents, and reflective aluminum pigments. It restores and protects metal surfaces from corrosion and can also be used to revitalize aging traditional asphalt roofs.
Product Details
Ideal Use
Restoring and protecting metal surfaces from
corrosion: roofs, cladding, storage tanks, water ducts, etc.
Ideal Substrates
Metal
Asphalt Roof
Application Type
Paint Brush
Rolled
Sprayed
Minimum
Application
Temperature
-40 °C to 80 °C
(-40 °F to 176 °F)
Clean Up
Clean wet tools with water. When dry, clean with petroleum solvents, such as mineral spirits, Varsol, and xylene
Restrictions
If the surface being treated is cracked or has holes, clean the surface, apply EXTERIOR PRIMER and repair with an ALUMINUM WATERPROOFING MEMBRANE. The coating may be applied to a previously coated substrate. However, it is not advisable to apply a paint coating. Do not apply in wet weather, when there is risk of condensation. It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride.
ALUMINUM ROOF COATING is a thick, homogeneous coating made of elastomeric bitumen, volatile solvents, and reflective aluminum pigments. It restores and protects metal surfaces from corrosion and can also be used to revitalize aging traditional asphalt roofs.
Benefits
Reduces surface temperature by protecting it from UV rays
Restores and protects metal surfaces
Can also be used to revitalize aging traditional asphalt roofs
Properties
Ideal Use
Restoring and protecting metal surfaces from
corrosion: roofs, cladding, storage tanks, water ducts, etc.
Ideal Substrates
Metal
Asphalt Roof
Application Type
Paint Brush
Rolled
Sprayed
Minimum
Application
Temperature
-40 °C to 80 °C
(-40 °F to 176 °F)
Clean Up
Clean wet tools with water. When dry, clean with petroleum solvents, such as mineral spirits, Varsol, and xylene
Restrictions
If the surface being treated is cracked or has holes, clean the surface, apply EXTERIOR PRIMER and repair with an ALUMINUM WATERPROOFING MEMBRANE. The coating may be applied to a previously coated substrate. However, it is not advisable to apply a paint coating. Do not apply in wet weather, when there is risk of condensation. It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride.
