A single component, neutral cure, gun-grade silicone firestopping sealant. It is an elastomeric, high performance sealant capable of meeting the joint movement requirements in a
fire-rated joint.
Elastomeric
4 hour system tested
Overview
Silicone Rubber
TECHNOLOGY
300 ML
VOLUME
Interior
USAGE
Product Details
Ideal Use
Sealing fire-rated service penetrations and construction joints in horizontal and vertical fire seperations
Building Assemblies
• Concrete and CMU
• Gypsum wallboard
Technology
Silicone Rubber
Application Type
Applicator Gun
Application Temperature
-29ºC to 50ºC
(-20°F to 109.4°F)
Service Temperature
-51ºC to 149ºC
(-59.8°F to 300°F)
Clean Up
Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away.
Restrictions
Recommended only for use in passive fire containment systems specifically listed or approved for DAP Inc. in the ULC Fire Resistance Directory. Do not apply over damp or contaminated surfaces. Not for use in stoves, fireplaces or other areas routinely exposed to high heat or flames, or for ASTM E 136 applications.
A single component, neutral cure, gun-grade silicone firestopping sealant. It is an elastomeric, high performance sealant capable of meeting the joint movement requirements in a
fire-rated joint.
Overview
Silicone Rubber
TECHNOLOGY
300 ML
VOLUME
Interior
USAGE
Benefits
Elastomeric
4 hour system tested
Product Details
Ideal Use
Sealing fire-rated service penetrations and construction joints in horizontal and vertical fire seperations
Building Assemblies
• Concrete and CMU
• Gypsum wallboard
Technology
Silicone Rubber
Application Type
Applicator Gun
Application Temperature
-29ºC to 50ºC
(-20°F to 109.4°F)
Service Temperature
-51ºC to 149ºC
(-59.8°F to 300°F)
Clean Up
Clean up excess wet caulk with a damp sponge before it skins over. Excess dried caulk must be cut or scraped away.
Restrictions
Recommended only for use in passive fire containment systems specifically listed or approved for DAP Inc. in the ULC Fire Resistance Directory. Do not apply over damp or contaminated surfaces. Not for use in stoves, fireplaces or other areas routinely exposed to high heat or flames, or for ASTM E 136 applications.
