Crafted to repel mice, birds, bats, and a variety of insects, including ants, roaches, spiders, and bees. Seals gaps and crevices in garages, attics, crawl spaces, basements, and around pipe and electrical penetrations.
Safe for indoor use and contains no lingering odour
Air seals and insulates to save on energy costs
Meets ASTM E84/UL 723
Overview
Polyurethane
TECHNOLOGY
12 / 16 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
Filling and sealing gaps and voids in foundations, attics and crawlspaces, pipe and electrical through penetrations and garages / outdoor sheds
Technology
Polyurethane
Application Type
Straw Dispense
Application Temperature
16°C to 38°C
(60°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap about 1/3 full, allowing room for expansion. Do not overfill. Direct sunlight discolors foam if not
painted or covered.
View Documentation
Documents
DAP Mouse Shield Foam Sealant and Pest Block – MSDS_EN
Crafted to repel mice, birds, bats, and a variety of insects, including ants, roaches, spiders, and bees. Seals gaps and crevices in garages, attics, crawl spaces, basements, and around pipe and electrical penetrations.
Safe for indoor use and contains no lingering odour
Air seals and insulates to save on energy costs
Meets ASTM E84/UL 723
Overview
Polyurethane
TECHNOLOGY
12 / 16 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
Filling and sealing gaps and voids in foundations, attics and crawlspaces, pipe and electrical through penetrations and garages / outdoor sheds
Technology
Polyurethane
Application Type
Straw Dispense
Application Temperature
16°C to 38°C
(60°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap about 1/3 full, allowing room for expansion. Do not overfill. Direct sunlight discolors foam if not
painted or covered.
View Documentation
Documents
DAP Mouse Shield Foam Sealant and Pest Block – MSDS_EN
PRODUCT CHART
Select any product code in the chart below to view pricing and available stock
