Max Fill provides 3x the expansion to fill gaps greater than 1 inch wide. Its weather-resistant bond seals out drafts and moisture. It can be used indoors or outdoors, is paintable, and comes with a reuseable adapter for more projects per can.
3X expansion to fill gaps greater than 25 mm (1 inch) wide
Blocks drafts, pests and insects
Class A fire rated
Overview
Polyurethane
TECHNOLOGY
12 / 16 / 20 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
Filling and sealing smaller gaps and openings
Technology
Polyurethane
Application Type
Straw Dispense
Application Temperature
-1°C to 48°C (30°F to 120°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap about 1/3 full, allowing room for expansion. Do not overfill. Direct sunlight discolors foam if not
painted or covered.
View Documentation
Documents
DAP Max Fill Triple Expansion Foam Sealant – MSDS_EN
Max Fill provides 3x the expansion to fill gaps greater than 1 inch wide. Its weather-resistant bond seals out drafts and moisture. It can be used indoors or outdoors, is paintable, and comes with a reuseable adapter for more projects per can.
3X expansion to fill gaps greater than 25 mm (1 inch) wide
Blocks drafts, pests and insects
Class A fire rated
Overview
Polyurethane
TECHNOLOGY
12 / 16 / 20 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
Filling and sealing smaller gaps and openings
Technology
Polyurethane
Application Type
Straw Dispense
Application Temperature
-1°C to 48°C (30°F to 120°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
For best results this product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap about 1/3 full, allowing room for expansion. Do not overfill. Direct sunlight discolors foam if not
painted or covered.
View Documentation
Documents
DAP Max Fill Triple Expansion Foam Sealant – MSDS_EN
PRODUCT CHART
Select any product code in the chart below to view pricing and available stock
