Eaveguard® Self-Adhered Shingle Underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of a roof. Eaveguard® is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
Overview
36" / 44"
WIDTH
61.3 Ft. / 65 Ft.
LENGTH
57 Mils
THICKNESS
Product Details
Ideal Use
Eaves, valleys and rakes, roof-to-wall connections, flashing around chimneys and skylights, roof vents and other penetrations and for providing full deck coverage
Building Component
Roofs
Ideal Substrates
Plywood, OSB, wood plank, wood composition, concrete, gypsum board sheathing, glass faced gypsum sheathing, metal and masonry
Composition
Modified-Asphalt Fiberglass Reinforced Membrane
Surface
Material
Sand-surfaced
Underface
Material
Split-back Release Film
Application Type
Self-adhesive
Service Temperature
-40 °C to 93°C
(-40 °F to 200 °F)
UV Exposure
60 days (Not designed for extended direct outdoor exposure)
Restrictions
Not resistant to oils and solvents. Avoid use of new dimensional lumber decking that may contain knots with resin levels that can attack and severely soften the Eaveguard bitumen compound.
Downloads
Documents
TDS – HENRY Eaveguard Self-Adhered
product chart
Select any Product Code in the table below to view pricing and available stock.
Eaveguard® Self-Adhered Shingle Underlayment provides a secondary line of defense to keep water that can get behind shingles from infiltrating further to help ensure the longevity of a roof. Eaveguard® is designed to offer protection against water penetration caused by wind driven rain or ice damming when installed in vulnerable areas of steep-slope roofs.
Overview
36" / 44"
WIDTH
61.3 Ft. / 65 Ft.
LENGTH
57 Mils
THICKNESS
Benefits
Self-seals when penetrated by mechanical fasteners or roofing nails
Sand-surfaced with a split-back release liner for easier handling during application
Properties
Ideal Use
Eaves, valleys and rakes, roof-to-wall connections, flashing around chimneys and skylights, roof vents and other penetrations and for providing full deck coverage
Building Component
Roofs
Ideal Substrates
Plywood, OSB, wood plank, wood composition, concrete, gypsum board sheathing, glass faced gypsum sheathing, metal and masonry
Composition
Modified-Asphalt Fiberglass Reinforced Membrane
Surface
Material
Sand-surfaced
Underface
Material
Split-back Release Film
Application Type
Self-adhesive
Service Temperature
-40 °C to 93°C
(-40 °F to 200 °F)
UV Exposure
60 days (Not designed for extended direct outdoor exposure)
Restrictions
Not resistant to oils and solvents. Avoid use of new dimensional lumber decking that may contain knots with resin levels that can attack and severely soften the Eaveguard bitumen compound.
Documents
TDS – HENRY Eaveguard Self-Adhered
PRODUCT LINE
Select any product code in the chart below to view pricing and available stock
