One-component polyurethane foam sealant that fills, expands and insulates in extreme temperatures as low as -7°C without cracking or hardening. For use with gun foam applicators for greater control and adjustable output.
Air and water tight seal for gaps, cracks, holes and joints
Class 1 fire rated
Overview
Polyurethane
TECHNOLOGY
20 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
To fill and seal through-penetrations, gaps and cracks in foundations, crawlspaces, attics and basements, partitions and stud walls, stair stringers, space connections in soffits and drop ceilings
Technology
Polyurethane (PU)
Application Type
Straw Dispense
Application Temperature
4°C to -38°C
(40°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
This product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4 full, allowing room for expansion.
One-component polyurethane foam sealant that fills, expands and insulates in extreme temperatures as low as -7°C without cracking or hardening. For use with gun foam applicators for greater control and adjustable output.
Air and water tight seal for gaps, cracks, holes and joints
Class 1 fire rated
Overview
Polyurethane
TECHNOLOGY
20 OZ.
VOLUME
Interior / Exterior
USAGE
Product Details
Ideal Use
To fill and seal through-penetrations, gaps and cracks in foundations, crawlspaces, attics and basements, partitions and stud walls, stair stringers, space connections in soffits and drop ceilings
Technology
Polyurethane (PU)
Application Type
Straw Dispense
Application Temperature
4°C to -38°C
(40°F to 100°F)
Clean Up
If wet foam contacts skin, clean immediately with a dry rag – do not use water – water accelerates curing. Cured foam must be removed mechanically from surfaces. Uncured foam can be cleaned from most surfaces with Foam Cleaner or acetone.
Restrictions
This product should only be dispensed in the UPSIDE-DOWN position and apply in spaces with 40% greater relative humidity. Fill gap no more than 1/4 full, allowing room for expansion.
